1、 Basic parameter adaptability
Pressure range (30-50psi/2.07-3.45bar)
This mini water pump can stably output moderate pressure, meeting the demand of the milk mixer for water flow impact force. For example, when rapidly dissolving milk powder or simulating the flow rate of breast milk, this pressure range ensures even mixing of the liquid, avoiding clumping or splashing.
Flow range (0.7-1.5 LPM)
The flow adjustability covers typical usage scenarios of milk mixers:
Low flow rate (0.7LPM): Suitable for slow water injection with precise temperature control to avoid splashing of high-temperature water.
High flow rate (1.5LPM): meets the needs of rapid mixing, such as preparing multiple cups simultaneously or filling large capacity milk bottles.
Life test (30 seconds on/10 seconds off,>300 hours)
In intermittent working mode, the lifespan of the water pump exceeds 300 hours. If the daily usage frequency of the milk mixer is low (such as 3 times/day), the lifespan can be several years, which meets the long-term needs of household use.
2、 Noise and negative pressure performance
Noise control (< 60dB@30cm ）
The noise level of the pump during operation is below 60 decibels (equivalent to normal conversation volume), which will not interfere with the baby's sleep or home environment. This performance is attributed to the silent design of the micro diaphragm pump, such as optimizing the pneumatic structure and using low-noise motors.
Negative pressure capacity (-25kPa) and self-priming function
Negative pressure capability: A negative pressure of -25kPa can ensure that the small water pump forms a stable vacuum when absorbing water, avoiding the interruption of water flow or the generation of bubbles caused by air entering.
Self suction function: The dc water pump body design supports self-priming, without the need for additional bottom valves or pre water injection, simplifying the structure of the milk mixer and improving its convenience of use.
3、 Food grade
Material Certification
All components of the food grade micro diaphragm water pump that come into contact with fluids, such as the dc pump body, diaphragm, sealing ring, pipeline, etc., must be made of materials that comply with food contact material standards and certified by the US Food and Drug Administration (FDA)